Plumbing Installation - Plumbing Questions
1.20 Plumber or Heating Contrator? Gas Tankless Water Heater Installation?

Q. I'm seriously considering purchasing one of these soon and I see that both licensed plumbers and heating and cooling pros offer installation. I wanted to know whom should I lean towards (even if it may cost more) and what type of questions should I ask in order to ensure I get a real pro?

A. Call a reputable plumbing and heating contractor for an on site estimate. Do not accept a price quote over the phone. Ask estimator to bring out brochures of various brands. Prices vary primarily due to warranties and installation materials. Heating and Air contractors install forced air units and employ sheet metal workers to do duct work. Plumbing and Heating contractors install plumbing and also install boilers for heating which involve piping. Check with Better Business Bureau prior to calling for estimates. Ask for references from potential contractor prior to signing work contract. Do not buy extended warranties on heater. Manufacturers warranty do not cover labor costs. The contractors installation warranty should be one year from date of installation.

1.00 Water heater vs. tankless system?

Q. Our gas water heater is going out and needs to be replaced. Our insurance will cover the water heater and installation, but not the additional costs to bring it up to code, about $900. We can take the cash out and make our own arrangements to get it fixed instead of having it replaced with an equivalent unit. We are thinking about a tankless system. I presume we would put it in the water heater closet, and we do want gas, not electric. Most of our plumbing is in the "core" of the house, so none of the hot water lines are more than 20 feet, and only the kitchen sink/dishwasher line is that long. If it matters, our house was built in the early seventies, and the current water heater is about 14 years old. If you have replaced yours this way, what do you think? How do the costs of the two systems compare? Is there a difference in your gas bill now? What about maintenance/repair/reliability? Would it still have the same code requirements, or would most of that stuff not apply? Would it still need the new thingamajig to cut off the water if there were a leak? Would it still need a pan installed? (Either way, we're going to have to change out a couple of gas lines.) Are there any brands much better/worse than others? What else do we need to know? All words of wisdom appreciated! Thanks!

A. I only know what my plumber told me about these when we were building our house and considering the tankless heaters. He said the gas was the best/fastest/most reliable and that we would would need one for each bathroom that had a shower/bath and one for the kitchen/laundry. We opted for a large electric hot water tank and do not run out of water, and are very happy with it. (I don't mean a huge tank, just one capable of handling our needs). You might want to check to be sure your needs can be met when you want hot water, and not have to stagger what you wish to do to ensure enough hot water.

1.00 Why would running a gas line from the meter to a gas fireplace cost $365?

Q. I got a fireplace installation estimate. One of the items was running gas line to the fireplace. The gas is about 30 feet from the fireplace with the gas meter inside the basement and the fireplace on the next floor. The ceiling is partially open like an unfinished basement for 15 feet and then a drop ceiling on the finished part for the last 15 feet. A possibly tricky part would be drilling a hole through a brick wall where the fireplace goes in a wood frame room addition added on to a brick house. I know I need a person who is certified to work on gas lines for safety reasons but this one part of the bid seems high and this is ONLY for the gas line installation, not anything else as those things are listed separately (and by the way are also high). This guy is the only dealer of the brand I want in my area and if you don't buy locally they aren't obligated to service your fireplace. Who else is qualified to install gas line?

A. Thats actually a pretty good price. You have to consider, ESPECIALLY, with installation of a gas line, the liability they are taking on doing the work. Not to mention the cost of materials, permits, inspections, and overhead to run the business. You are much better off to pay a little more now than to look for a cheap altenative. If any thing goes wrong who would you rather blame? Yourself for saving a few bucks or the guys with the insurance? Think wisely here!!!

1.00 2002 volkswagen passat starting problem?

Q. I have a 2002 volkswagen passat with 120k miles on it. I have had the 100k mile service done during the winter and it drove ok then. Well one day it just stopped in traffic. I took it to a shop and they said that it was because of an inproper installation of the aftermarket radio. They fixed it and the epc light doesn't come on anymore. Now my car won't start in the mornings without me reving up the engine a bunch. The car will start fine the rest of the day. I also noticed that the floor in the back of the passenger side was wet, and I cleaned out the sunroof drains that are where the door open. There are no error codes coming from my car, but it still has a lot of trouble starting in the morning. Any help?

A.

1.00 Can coaxial cable send HD signals?

Q. Please read this short story: my dad subscribed for HD service. We had it installed, and unfortunately, I was not there to witness the installation. Here is what the guy did: he took the coaxial cable from the wall and plugged it into our new HD converter box. He then took an HDMI cable out from the box and left it on the floor (thinking we wouldn't notice?). He then took another coaxial cable, and connected it to the coaxial cable out from the box and plugged it into the VHF/UHF input on our DVI-HDTV (hence why he had no where to plug in the HDMI). So my question is, am I watching HDTV? I believe I am just watching standard TV with the current hookup. If I am not mistaken, I'd like to solve the problem obviously. The box has component video out. Would you recommend I get a component cable out from the box and into the HDTV, or get a female HDMI adapter with male DVI (more expensive)? If it does not matter, I will buy the component which is extremely cheaper. Thanks for your time.

A. You are not watching HD. For HD you either need a component cable or HDMI/DVI cable hookup between the converter box and the TV.

1.00 Should I caulk the edges of tile kitchen floor?

Q. We're having a new tile floor put into the kitchen. They are about to grout, and a week later they said they would seal it. In the interim we are having the baseboards put in. Is it a good idea to put some caulking on the edge, between the tile and the wall, before putting the baseboards in? Just thinking when we wash the floor, don't want the water going down the edges, between the tile and the wall. I'd done that when I tiled the bathroom floor. Also, is it ok to put the baseboard in BEFORE the grout is sealed? The installer made it sound like he was sealing the tile ... it's the grout, isn't it? Or both? I'd wait for the trim, but we are on a tight schedule because we are finishing up a construction loan (the rate is locked, need to have it inspected to get things done in time). Thanks It's too late to put the baseboard on before the tile. So should I caulk the tile end / wall? Any negative to it?

A. You can top set the base boards for a nice clean look. The grout is what the guy will seal unless you have an unglazed tile of some sort. Then it had better have been sealed before installation,, As far as the caulking goes, you won t hurt a thing by doing so but really isn t needed. You really shouldn t be getting that much water on the floor when mopping to have to worry about it going under the baseboards.. Any questions you can e amil me through my avatar and check my qualifications there, GL

1.00 How do I take up carpet and install hard wood floors in my house?

Q. We've got some old dirty burbur carpet-there's a subfloor but I'm not sure what its made of-what's a good price for real wood hardwood floors? Thanks for any help.

A. For real hardwood, prefinished about $3.99 to Exotic at 18.99 per sqft. For pro installation expect about $3. to $4. Remember its expensive, pro installation makes it perfect. Also cheap berber is less than $2.00 installed with pad complete. Example 12 x 12 room in berber is $288.00 in hardwood cheap is over $1000. to exotic $3100.

1.00 Cost for wood floors install?

Q. I have someone doing my floors and installing wood floors in 2 rooms and my kitchen with stone tiles for $2800 here are the measurements: living room 17 by 15 Dining room 15 by 12 kitchen 20 by 17 with center island is that a good deal? just for labor?

A. $3.50 per square foot is the average price for installation

Plumbing Installation

 Plumbing - Plumbing Installation While most plumbing installation jobs are best left to professionals, there are a few simple tasks that you can undertake, provided you have high DIY skills, like installing a toilet. Make sure that you use pipes that are the right size, and take care to align the tubing into valves and fittings properly. First, use a putty knife to remove the old wax gasket. Set the floor flange in such a way that its underside is on level with the finished floor. Tighten the screws that connect the flange to the floor, and set in plumber's putty. Insert them through the flange, aligning them properly with the center of the drain pipe. Place the new wax gasket on the toilet horn located at the bottom of the toilet bowl, and use plumber's putty to seal. Now, lower the bowl into place using the bolts to guide the exact position over the flange. Press firmly, and give a little twist, so you feel the bowl being pressed into the wax ring. Level the bowl, and make sure it is aligned with the valve. Tighten washers and nuts by hand. Fit the rubber gasket on the opening of the flush valve at the bottom of the tank. Place the tank over the bowl, and tighten the washers and nuts. Seal the base with plumber's putty.

 Jackson plumber in Jackson, Mississippi Installing a faucet is one of the most simple plumbing installation jobs. You need simple tools like locking pliers, a slip joint, an adjustable wrench and some plumber's putty. Bottom mounted faucets are easy to remove and replace, but top mounted faucets are screwed in place by nuts that are positioned under the sink. Once you manage to remove the old faucet, place the new faucet in place (in case of a bottom mounted faucet), and then place the washers and nuts. Finally, tighten with a wrench, and use plumber's putty to seal the base of the faucet.

Trust our system to find you reputed Jackson plumbers to help with toilet installation, kitchen sink plumbing installation, installing bathroom plumbing, including shower plumbing and bathtub plumbing. Our system matches you with the best plumbing installation services to help with your needs.

Are You a Pro?

List Your Services Here for Free!

Join Us!

Your Business Name

Areas Served:
Services Provided:
e.g. Plumbing

Recent People With Plumbing Needs:

I need drain unclogging in 2 upstairs showers and 1 sink. Thanks.

Casey B

At this time I'm looking for an estimated cost for installation of a garbage disposer which I would like the total estimate including the service call and labor. Thanks.

Holly D

Get Free Quotes from up to 4 Top Plumbing Companies in Jackson, Mississippi

Connect with up to 4 Area Accountants

By submitting your information, you agree to be contacted regarding your service request, using email, telephone or text – including the use of autodialed and/or prerecorded calls or messages to the telephone number provided above, including your wireless number, if provided. You understand that consent is not a condition of purchase.

+
-

Plumber Jackson, Mississippi

Our contractor partners happily serve the following suburbs and zip codes: A H McCoy Federal Bldg, Allstate Ins, Blackman, Deposit Guaranty Natl Bk, Gooselake, Jackson State University, Jax, Jksn, Jxn, Leonl, Metrocenter, Michigan Center, Millsaps College, Minards Mill, Roots, Sandstone, Spring Arbor, Summit, Visa, Woodville, 39201, 39202, 39203, 39204, 39205, 39206, 39207, 39209, 39210, 39211, 39212, 39213, 39215, 39216, 39217, 39225, 39235, 39236, 39250, 39269, 39271, 39282, 39283, 39284, 39286, 39289, 39296, 39298